The situation
A mid-size U.S. sensors manufacturer sold packaged products into California and Minnesota. Two new state laws landed almost at once: California’s SB 54 packaging producer-responsibility program and Minnesota’s PFAS reporting law (Amara’s Law). Nobody in the company owned either one. The work kept landing on one person, who was already carrying the full regulatory load.
What was done
California SB 54
Before anything was filed, I worked out whether the company was a “producer” under SB 54. That turned out to be the easy part. Once it was clear the company needed to file, the information was difficult to gather, because much of it didn’t really exist.
First came figuring out the sales to California, and what percentage was sent there, for 2023 and 2025. With the percentage in hand, I worked with purchasing to figure out what was bought as packaging in those years.
The next step was estimating component by component: every box, insert, bag, tape strip and label became its own line, mapped to one of CalRecycle’s roughly 95 Covered Material Categories. The judgment is in deciding which category each item belongs to: the resin, or whether paperboard is coated or uncoated. It is not about whether something is “single-use.” Single-use is the coverage test; the report itself has no single-use column, and recycled content is still reported.
Weight, the number the fees are calculated from, was the hardest to get. Supplier specs often don’t list it, so it came from weighing samples and from documented estimates. Once a full year’s packaging was worked out, I applied the California percentage, registered the company on the correct compliance path, and reported the packaging inventory the program asks for: materials, formats, quantities and where it goes, component by component, with the weights.
Minnesota PFAS
The question was which products had intentionally added PFAS, and in which parts. I chased the supplier data product by product, through questionnaires, emails and calls. But there were over 4,000 SKUs, the data was scattered, and there were plenty of gaps where it simply didn’t exist.
So I worked from the products I could evidence, brought in substance experts, and applied what we learned to the rest of the 4,000+ SKUs. When that wasn’t enough, I had a sample tested. Then I completed the state’s PRISM report, product by product.
Supplier documentation
I built the trail: who supplied what, what declarations existed, and what was missing, so the filings could be evidenced, not just asserted. That due-diligence file is still in use today.
The result
The company was registered and reported for California SB 54 and Minnesota PFAS, on deadline, by one person doing a job that should have taken two to five people.
The filings are the proof; this page is the story of how they got done.
What this means for you
If you sell packaged goods in California or products into Minnesota and haven’t checked whether these laws apply to you, the order of operations is the same: work out if you’re covered, register, and get your packaging and supplier data in order. After that, the program also asks for a forward-looking source reduction plan.
That is the work Golden Rose Advisors does: we guide manufacturers through a fixed-scope sprint, not an open-ended engagement. The messy parts are the reason to get help. The judgment calls live in the grey areas, not in the forms.
Golden Rose Advisors — Wendy Willard · Regs@GoldenRoseAdvisors.com · (716) 260-3128